Vandaja Paints - Premium Wall Putty, Water Proof Wall Putty, Premium White Cement

Your plastered walls may feature uneven surfaces. Applying 2 thick coats of Putty will even out these surfaces and provide your painted walls a smooth, final finish.
Wall care putty combines with plaster to make a stronger bond with paint and makes it longer lasting and durable.
Because it has water-resistant properties, putty will save your paint from dampness as well as the resultant discolored patches for a long time.
It prevents flaking of expensive coats of paints
Putty is eco-friendly.
It doesn’t need curing
It brings out the true tone or shade of the paint
Provides your walls a smooth, silky finish
The products can be used for both exterior and interior walls.

Application can easily applied on plastered surface.
It gives fine finish and it is very useful for Inner and Outer walls.
Before applying wall putty makes sure that the surface is free from dust or not, if not make it dust free. Also make sure that it is free from any type of fungus, greases, bitumen, and any kind of release agents, moss, paints, oils, loose particles or any kind of coating. Make sure that the surface should be free from all the above mentioned impurities otherwise it affects the workability of wall putty.
Before applying make sure that the surface where the putty is supposed to be applied should be pre-wetted.
This will helps you to provide a very strong bond with the substrate.
It’s better to apply at least two coats of Vandaja Premium Wall Putty White Cement Based Putty on plastered surface of wall
The Vanadja Water Proof Wall Putty Based Putty covers almost more surface area that is exceeding to 9-10 Sq. ft. /kg. In two coats on new plastered wall.

Keep out of reach of children and away from food, drink may be harmful if swallowed. In case of ingestion seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation. Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth. Safety Data Sheet available on request. No added Lead, Mercury or Chromium compounds

Decorative White Cement